We are independent & ad-supported. We may earn a commission for purchases made through our links.
About Mechanics
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Machinery

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Ball Valve?

By Katharine Swan
Updated: May 17, 2024
Views: 32,689
Share

A ball valve, one type of quarter turn valve, is quite literally a ball placed in a passageway through which fluid flows. The ball has a hole through it, by which the valve opens and closes. When the ball is positioned so that the hole runs the same direction as the passageway, the fluid simply flows through it, and the valve is open. The ball can also be positioned so that the hole is perpendicular to the passageway so that the fluid cannot pass through, and the valve is closed. It is controlled from the outside, often with a handle that is turned back and forth to open and close the valve.

The basic version described above is a two-way valve. This type has a single, straight passageway bored through the ball, making two openings: one on each side, an inlet and an outlet. A ball valve can also be a three-way valve if a third hole is bored partially through the ball, until it meets the main hole, forming a T. A three-way valve can shut off one or all of the three passageways it connects.

Because of the nature of this valve, it does not work well in situations where fine control of the valve is needed, such as the valve that controls the throttle in a car. It does work very well for situations in which a flow needs to be completely shut off, such as the shut-off valve on the main water line in a house. Ball valves also do not tend to develop problems if they are not used for long periods of time; they will still work perfectly when needed again.

There are three different types of ball valve. A full port valve offers no flow restriction, which means that when it is open, the liquid can flow freely through it. This is achieved by making the ball larger than the passage size, so that the hole can be the same size as the passage. A standard port ball valve does not have an oversized ball, and as a result, the hole is one size smaller than the passageway. This creates a small amount of flow restriction as the fluid passes through. A reduced port valve, on the other hand, has an smaller ball and an even smaller hole, which creates significant flow restriction as the fluid passes through it.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
See our Editorial Process Share Feedback

Editors' Picks

Related Articles

Discussion Comments
By anon51981 — On Nov 10, 2009

Horizontal plane ball valves - most common and most are L-port configuration. Center port is always the common port. Flow goes in center port to and turns left or turns right. Or flow comes from left or right and diverts out the center port. There is no shut off position and there is mixing of the side ports when the valve is in transition.

This can be a desirable feature if you are putting water in two different tanks and don't want to dead head the pump when switching tanks. This valve can also be used as a shut off valve if the ball is rotated and then the handle is repositioned, but it would be less expensive to use a two-way ball valve.

T-port horizontal plane ball valves can be used for a straight through and a divert valve. In the straight through position there is less pressure drop than when using an L port valve.

T-port horizontal plane valve can also be used so that the center port is common and you either have flow to the left port or you have flow to all three ports at once.

Say you wanted to use one paint sprayer or perhaps two sprayers at the same time.

Bottom entry ball valve - can be used much like a horizontal plane three-way L port ball valve or can be ported so that you select from the left port, the center port (off and no mixing) or the right port.

By anon29922 — On Apr 11, 2009

How can you design a ball in a ball valve? Is there any special formula?

By anon5865 — On Dec 08, 2007

Yes, some ball valves have the common opening around the axis of the ball's rotation. However, if you wanted more selections available, a T would also work. Then you could have A connected to B, A connected to B and C, or B connected to C, depending on the rotation of the T.

By anon5078 — On Nov 12, 2007

I disagree with your explanation of how a three way valve operates. I have a three way valve that only takes a quarter turn to direct the flow to either outlet. I have drawn the "T" configuration you propose. It would take a half turn to change the selection from one outlet to the other and at the quarter turn point either all three ports are connected or the two outlet ports are connected. I submit that the three way valve has two separate "L" shaped circuits drilled into the ball. In this arrangement the two outlets are never connected which is usually desirable. A single source, the center port can be directed to either end port or in reverse two sources (end ports) can be connected to one center port. In the latter the two sources would be isolated.

WiseGeek,
in your inbox
Our latest articles, guides,
and more, delivered daily.
Follow us:
Share
https://www.aboutmechanics.com/what-is-a-ball-valve.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.